CCNA Free with CCNP Kochi Kottayam Calicut Kannur Malapuram- Value for your money
Logic

Placed Students

Upcoming Batches

CCNP Course (CCNA Free)

CCNP along with CCNA is the best for Indepth Routing and Switching studies

STUDENTS ENROLLED

    CCNP Course- Cisco Certified Network Professional (with CCNA FREE)

    In this course, Logic provides you CCNA Free when you join for CCNP Course.  This course is very much needed for those who want to study in depth of Routing and Switching at less cost and affordable to all. Only Limited students are admitted to this course since the fees is low.

     

    Module 1: ROUTING: Operation of IP Data Networks

    • Operation of IP Data Networks

    • Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs.

    • Select the components required to meet a given network specification.

    • Identify common applications and their impact on the network

    • Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models.

    • Predict the data flow between two hosts across a network.

    • Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN

    IP addressing (IPv4 / IPv6)

    • Describe the operation and necessity of using private and public IP addresses for IPv4 addressing

    • Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.

    • Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.

    • Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack

    • Describe IPv6 addresses

      • Global unicast , Multicast , Link local , Unique local , eui 64 , autoconfiguration

    IP Routing Technologies

    • Describe basic routing concepts

      • CEF , Packet forwarding , Router lookup process

    • Describe the boot process of Cisco IOS routers

      • POST , Router bootup process

    • Configure and verify utilizing the CLI to set basic Router configuration

      • Cisco IOS commands to perform basic router setup

    • Configure and verify operation status of a device interface, both serial and Ethernet

    • Identify different WAN Technologies

    • Configure and verify a basic WAN serial connection

    • Configure and verify a PPP connection between Cisco routers

    • Configure and verify Frame Relay on Cisco routers

    • Implement and troubleshoot PPPoE

    • Verify router configuration and network connectivity

      • Cisco IOS commands to review basic router information and network connectivity

    • Configure and verify network device security features such as

      • Device password security , Enable secret vs enable , Transport , Disable telnet , SSH , VTYs , Physical

    security , Servicepassword ,Describe external authentication methods

    • Differentiate methods of routing and routing protocols

      • Static vs. Dynamic , Link state vs. Distance Vector , Administrative distance , split horizon , metric , next hop ip, routing table , Passive Interfaces

    • Configure and verify routing configuration for a static or default route given specific routing requirements

    Implement an EIGRP based solution, given a network design and a set of requirements

    • Determine network resources needed for implementing EIGRP on a network

    • Create an EIGRP implementation plan

    • Create an EIGRP verification plan

    • Configure and verify EIGRP

      • Feasible Distance / Feasible Successors /Administrative distance , Feasibility condition , Metric composition , Router ID

    Auto-summary, Path selection , Passive interface

      • Load balancing

    Equal , Unequal

    • Verify EIGRP solution was implemented properly using show and debug commands

    • Document results of EIGRP implementation and verification 

    Implement a multi-area OSPF Network, given a network design and a set of requirements

    • Determine network resources needed for implementing OSPF on a network

    • Create an OSPF implementation plan

    • Create an OSPF verification plan

    • Configure and verify OSPF

      • Benefit of single area , neighbor adjacencies , OSPF states , Discuss Multi area , Configure OSPF v2 , Configure OSPF v3 ,

    Router ID ,Passive interface , LSA types

    • Verify OSPF solution was implemented properly using show and debug commands

    Document results of OSPF implementation and verification plan 

    IP Services

    • Configure and verify DHCP (IOS Router)

      • configuring router interfaces to use DHCP , DHCP options , excluded addresses , lease time

    • Manage Cisco IOS Files

      • Boot preferences, Cisco IOS image(s)

      • Licensing

        • Show license , Change license

    • Describe the types, features, and applications of ACLs

      • Standard

        • Sequence numbers , Editing

      • Extended , Named , Numbered , Log option

    • Configure and verify ACLs in a network environment

      • Named , Numbered , Log option

    • Configure and verify ACLs to filter network traffic

    • Configure and verify an ACLs to limit telnet and SSH access to the router

    • Identify the basic operation of NAT

    • Purpose , Pool , Static , 1 to 1 , Overloading , Source addressing , One way NAT

    • Configure and verify NAT for given network requirements

    • Configure and verify NTP as a client

    • Configure and verify Syslog

      • Utilize Syslog Output

    • Describe SNMP v2 & v3

    Implement an IPv4 or IPv6 based redistribution solution, given a network design and a set of requirements

    • Create a redistribution implementation plan based upon the results of the redistribution analysis

    • Create a redistribution verification plan

    • Configure a redistribution solution

    • Verify that a redistribution was implemented

    • Document results of a redistribution implementation and verification plan

    • Identify the differences between implementing an IPv4 and IPv6 redistribution solution 

    Implement Layer 3 Path Control Solution

    • Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis

    • Create a Layer 3 path control verification plan

    • Configure Layer 3 path control

    • Verify that a Layer 3 path control  was implemented

    • Document results of a Layer 3 path control implementation and verification plan

    • Implement basic teleworker and branch services

    • Describe broadband technologies

    • Configure basic broadband connections

    • Describe basic VPN technologies

    • Configure GRE

    • Describe branch access technologies

    Implement an eBGP based solution, given a network design and a set of requirements

    • Determine network resources needed for implementing eBGP on a network

    • Create an eBGP implementation plan

    • Create an eBGP verification plan

    • Configure eBGP routing

    • Verify eBGP solution was implemented properly using show and debug commands

    • Document results of eBGP implementation and verification plan

     Implement an IPv6 based solution, given a network design and a set of requirements

    • Determine network resources needed for implementing IPv6 on a network

    • Create an IPv6 implementation plan

    • Create an IPv6 verification plan

    • Configure IPv6 routing

    • Configure IPv6 interoperation with IPv4

    • Verify IPv6 solution was implemented properly using show and debug commands

    • Document results of IPv6 implementation and verification plan 

    Module 2 : SWITCHING

    Implement VLAN based solution, given a network design and a set of requirements

    • Determine network resources needed for implementing a VLAN based solution on a network

    • Create a VLAN based implementation plan

    • Create a VLAN based verification plan

    • Configure switch-to-switch connectivity for the VLAN based solution

    • Configure loop prevention for the VLAN based solution

    • Configure Access Ports for the VLAN based solution

    • erify the VLAN based solution was implemented properly using show and debug commands

    • Document results of VLAN implementation and verification 

    Implement a Security Extension of a Layer 2 solution, given a network design and a set of requirements

    • Determine network resources needed for implementing a Security solution

    • Create a implementation plan for the Security solution

    • Create a verification plan for the Security solution

    • Configure port security features

    • Configure general switch security features

    • Configure private VLANs Configure VACL and PACL

    • Verify the Security based solution was implemented properly using show and debug commands

    • Document results of Security implementation and verification 

    Implement Switch based Layer 3 services, given a network design and a set of requirements

    • Determine network resources needed for implementing a Switch based Layer 3 solution

    • Create an implementation plan for the Switch based Layer 3 solution

    • Create a verification plan for the Switch based Layer 3 solution

    • Configure routing interfaces Configure Layer 3 Security

    • Verify the Switch based Layer 3 solution was implemented properly using show and debug commands

    • Document results of Switch based Layer 3 implementation and verification 

    Prepare infrastructure to support advanced services

    • Implement a Wireless Extension of a Layer 2 solution

    • Implement a VoIP support solution

    • Implement video support solution 

    Implement High Availability, given a network design and a set of requirements

    • Determine network resources needed for implementing High Availability on a network

    • Create a High Availability implementation plan

    • Create a High Availability verification plan

    • Implement first hop redundancy protocols

    • Implement switch supervisor redundancy

    • Verify High Availability solution was implemented properly using show and debug commands

    • Document results of High Availability implementation and verification

    Module 3 : TSHOOT

    Maintain and monitor network performance

    • Develop a plan to monitor and manage a network

    • Perform network monitoring using IOS tools

    • Perform routine IOS device maintenance

    • Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer 

    Troubleshoot Multi Protocol system networks

    • Troubleshoot EIGRP

    • Troubleshoot OSPF

    • Troubleshoot eBGP

    • Troubleshoot routing redistribution solution

    • Troubleshoot a DHCP client and server solution

    • Troubleshoot NAT

    • Troubleshoot first hop redundancy protocol

    • Troubleshoot IPv6 routing

    • Troubleshoot IPv6 and IPv4 interoperability

    • Troubleshoot switch-to-switch connectivity for the VLAN based solution

    • Troubleshoot loop prevention for the VLAN based solution

    • Troubleshoot Access Ports for the VLAN based solution

    • Troubleshoot private VLANS

    • Troubleshoot port security

    • Troubleshoot general switch security

    • Troubleshoot VACL and PACL

    • Troubleshoot switch virtual interfaces (SVIs)

    • Troubleshoot switch supervisor redundancy

    • Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video)

    • Troubleshoot a VoIP support solution

    • Troubleshoot a video support solution

    • Troubleshoot Layer 3 Security

    • Troubleshoot issues related to ACLs used to secure access to Cisco routers

    • Troubleshoot configuration issues related to accessing the AAA server for authentication purposes

    • Troubleshoot security issues related to IOS services (i.e.,finger, NTP, HTTP, FTP, RCP etc.)

    Project: Realtime Networking Implementation Training 6hrs)

    Fees: Fees can be paid in 12 Installments.For details Contact us.

    For Details Contact Central Office Cochin :-
    Ms. Angel / Mr. Akhil
         Mobile & Whatsapp No: +91 9947422200 / 9744166610
         Land phone: 91-484-4049001 / 03
         Email id: enquiry@logicindia.net
    Skype : logicenquiry
    GTalk  : enquiry@logicindia.net

    CCNA CCNP Course Training Ernakulam Cochin

    Course Reviews

    No Reviews found for this course.

    Popular Courses

    Placed Students

    Our Gallery

    Our coordinator is online most of the time in common messengers so that you can to talk LIVE. If you don't find our coordinator online, please click 'Contact Us' to submit us the details or simply leave us an offline message in the IM.


    Subscribe to Job Updates

    • This field is for validation purposes and should be left unchanged.

    Hiring Companies

    top